User Guide for H2yunshen Brand X5 Best Hydrogen water bottle

Benefits ReviewsFor Athletes Sports Exercise, Fitness & Wellness, Beautycare & SkinCare

(* In response to environmental protection requirements, we do not provide paper instructions. Our instructions can be viewed on the website)

I. Instructions for use

1. Warning before use

A. When consumers open this product, please make sure that the red dehumidification plug has been removed. This moisturizing plug is made of silicone material and is disposable. It is not recommended to use it again.
B. When consumers use this product for the first time or have not used this product for a long time, they need to pre-activate the proton membrane in the hydrogen-rich water generator.
Activation method: Pour half a cup of pure water or purified drinking water, make sure the power supply is full and full, (it is recommended to drop a little white vinegar) and soak for one hour. After soaking in pure water or purified drinking water, rinse it, turn it on and use it repeatedly (the specific number of times is 2-3 times, switch for 5 minutes, 10 minutes, and find that bubbles continue to emerge normally, which is the normal use state).

*Note.Continuous normal emergence: The LED indicator of the hydrogen-rich water cup automatically switches to different lighting effects, and bubbles emerge continuously from less to more.

C. Special warning:
The water temperature must not exceed 55 degrees, otherwise the hydrogen production effect will be greatly reduced.
It is strictly forbidden to produce hydrogen when there is no water in the cup or the water cup is less than half of the cup body. It is recommended that the water should not exceed 2/3 of the cup capacity. It is not recommended to produce hydrogen with a full cup, as the pressure will be too high and the cup lid cannot be unscrewed.
When you find that you cannot unscrew the cup lid, do not force it open, just unscrew it from the interface between the base and the cup body

2. Instructions for use

A. Pour an appropriate amount of pure water or distilled water or purified drinking water into the cup (water temperature is less than 55 degrees Celsius). Be careful not to fill the water. It is recommended to fill the cup to 2/3 of the capacity as the most appropriate method.
B. Press the power start button lightly to start the hydrogen production program. The LED light effect lights up and displays the countdown time (tap to switch the required hydrogen production cycle, 5 minutes and 10 minutes cycle. Long press 3S to turn off the power)

3. Magnetic battery charging

This product supports USB magnetic battery charging. Connect to the power supply, wait for the blue light on the USB magnetic head to light up, align the USB magnetic head with the magnetic head on the base, and the battery display area on the display screen flashes to start charging. After fully charged, the display will show that the power is full. Please cut off the power to prevent overcharging from affecting the battery life.
Charging time: After fully charged, it can be used up to 24 times in a 5-minute cycle to produce hydrogen, and up to 12 times in a 10-minute cycle.

II. Maintenance

1. Maintenance:

Daily cleaning: Please make sure to clean with pure water or purified drinking water before use every day.
Weekly cleaning: It is recommended to clean once a week. Use a small amount of white vinegar and a full cup of water to soak for 1 hour, then use pure water or purified drinking water to clean before use.
Charging frequency: Charge at least once a month to keep the battery in normal use.

2. Maintenance matters

If the number of hydrogen bubbles is significantly reduced during use, add a small amount of white vinegar and soak in a full cup of water, then wash and it will return to normal

3. Repair and Maintenance

Warranty and Repair

A. Shelf life: This product supports a 1-year shelf life or a set working time of 3000 hours (either of which can meet the quality requirements of this product).

B. Only free repairs due to quality problems are supported. Machine failures, damages caused by consumers' own failure to comply with the precautions listed in the manual, and unauthorized disassembly of the product, as well as product damage caused by external factors such as bumps and falls are not included.
C. For repairs due to quality problems, consumers need to mail the product including the packaging intact to the designated address (no freight to be paid), confirm the quality problem after inspection, start the repair, determine the progress of the repair, and finally deliver it.
D. For repairs due to non-quality problems, consumers need to bear the round-trip freight and tariffs.
E. No warranty service is provided when the life of consumable accessories expires

III. After-sales and service

24-hour service at the moment. Please email with the subject: Purchase time, quality issues to H2yunshen@yunshentech.com or scan the QR code on this packaging box or this manual to contact us. We will reply to your message within 24 hours at the latest.

IV. Precautions for use

1. Water quality selection:

The water source must meet the highest standards of the drinking water guard standard in the consumer's location. It is recommended to use purified water, distilled water, mineral water or purified water produced by a purification device, and warm water with a temperature not exceeding 55 degrees. Do not pour juice, beverages or other chemicals. There is currently no experiment to prove whether adding the above substances is dangerous or not. Principle of caution: Mixing is prohibited, but the hydrogen-rich water after hydrogen production can be poured into juice or beverages for drinking, but it is not recommended because it may interfere with nutrient absorption. It is recommended to use them separately to achieve the nearest nutrient absorption effect.

2. Water temperature selection:

The water temperature must not exceed 55 degrees, and room temperature water is recommended

3. Cleaning:

If water overflows, please wipe the outside of the hydrogen water generator with a clean rag.

4. Sediment:

When the hydrogen-rich water generator works for a long time, mineral precipitation may occur (such as more white crystalline particles in the water, especially when using non-pure water). You can use an appropriate amount of white vinegar or citric acid heated to about 40 degrees to soak for 10-30 minutes, pour out the soaking liquid, and wash with pure water.

5. Drinking time:

Due to the easy escape of hydrogen, it is recommended that you open the lid and use it immediately. It is not recommended to keep it for more than 30 minutes without opening the lid. If it is not opened for a long time, it is recommended to re-produce hydrogen once to achieve the best concentration.

6. Moisturizing and storage:

When the hydrogen-rich water generator is not in use, a small amount of water needs to be retained in the hydrogen-rich water generator and stored in a cool place. Before using it again, please empty the water in the generator and clean it before hydrogen production. Note: The small amount of water retained must not be polluted or contaminated. If the water quality is polluted, it needs to be immediately soaked in white vinegar and washed before use. If the water quality changes due to long-term storage, it is not recommended to use it again for your health (this brand does not bear any legal responsibility for any legal issues caused by this). Please replace a new product for use.

7. Cleaning the sealing ring:

Use a toothpick to easily remove the sealing ring from the bottom of the sealing ring for cleaning (the sealing ring must be complete), clean it with pure water and put it on the card slot, cover the cup lid and tighten it, and the sealing ring will automatically fit.

8. Regular cleaning:

In order to extend the service life of the product, the hydrogen water generator needs to be cleaned regularly. The hydrogen water generation system is precise and sensitive. Pay attention to the following points when cleaning

A, Cleaning the generator

Do not rinse the outside of the hydrogen water generator with water, just wipe it with a wet cloth

If the power interface of the hydrogen water generator is soaked in water, it must be thoroughly dried (or blown dry with a hair dryer and then dried to ensure that water will not enter the electrolyzer to cause short circuit or poor contact)

B, Clean the exhaust gas outlet

If used for a long time, a large amount of minerals will accumulate at the outlet, causing poor hydrogen outlet, so regular cleaning is required.

Clean once every two weeks, and wipe the exhaust vent at the bottom with a sponge or soft cloth dipped in white vinegar.
You can put base white vinegar in the exhaust vent, then pour in pure water and soak for 5-10 minutes before turning on the generator.
If the minerals accumulated over a long period of time are difficult to remove, you can put in 5g of citric acid and warm water and soak for 30 minutes to 60 minutes, then start the generator. Note that the working time needs to be adjusted according to the degree of mineral accumulation.